I need a measurement...?

Scott S · #1 (**permalink**) 12-30-2011, 11:46 AM

Can somebody get me the distance from the front cover to the outside of the crankshaft pulleys for a 302? It would be great if you have March single or double pulleys.

I am trying to squeeze a engine in behind a cross member.

Scott S

Tom Cimino · #2 (**permalink**) 12-31-2011, 05:03 AM

I hooked my tape measure to the back of the timing pointer and came up with 5 1/2 inches. I have stock steel v-belt pulleys.

Scott S · #3 (**permalink**) 12-31-2011, 06:43 AM

Quote:

Originally Posted by Tom Cimino

I hooked my tape measure to the back of the timing pointer and came up with 5 1/2 inches. I have stock steel v-belt pulleys.

Thanks, CC members are great!

Scott S

Scott S · #4 (**permalink**) 12-31-2011, 09:26 PM

Anybody with March pulleys?

Scott S

Scott S · #5 (**permalink**) 12-31-2011, 09:29 PM

Anybody with March pulleys?

Scott S

LMH · #6 (**permalink**) 01-01-2012, 07:49 AM

We just measured my brothers 347 and got 5 3/8". It has a Ford Motorsports serp pulley and a 1" spacer.
That's measured from the timing cover directly behind the balancer to the outer edge of the crank pulley.
Larry