| 
			
			 
			
				03-22-2016, 01:43 PM
			
			
			
		 | 
	| 
		
			
			| CC Member   
 | 
 |  | 
					Join Date: Jun 2006 Location: Calgary, 
						AB Cobra Make, Engine: Butler Racing/427 side oiler 
						Posts: 371
					      |  | 
	|    Not Ranked 
				 thoughts? ..chime in 
 SO ..Im building a 302 ..Before everyone gets on me about aluminum heads blah blah understand that these are a bunch opf parts that I am trying to put together a engine with for minor money.
 Now.
 I have a 74 302 block ..it was in good shape but going .40 over with flat top Hypereutectic pistons.
 stock crank was in good shape so polish and back in. rods are fine - will go with ARP bolts.
 new bearings all round.
 I have a set of good worked a little 351 heads from 1970. going to bolt them on and see how they are. ( I know ...just get Aluminum heads ) These are free mind you.
 This is the Cam I have Ford M-6250-312 matched with lifters and springs.
 then a performer intake a holley carb.
 
 then headers (not sure what yet)
 
 thoughts?
 
 Thanks all who chime in
 |