Oil Dipstick

Trueoo7 · #1 (**permalink**) 02-06-2007, 04:09 PM

Does anybody know where to get one to fit a 91-93 302 preferably in chrome. I bought the Ford Motorsport one and can't get it to fit in the block hole or around the header bolt (header to close).

Dwight · #2 (**permalink**) 02-06-2007, 05:47 PM

I gave about $55 for a Lokar. When I bought a Canton oil pan, I had to buy a brass nipple and compression fitting to make the dip stick work.

Dwight

Rwillia4 · #3 (**permalink**) 02-06-2007, 09:50 PM

This might be what you are looking for
http://www.jegs.com/webapp/wcs/store...9393_-1_234494

jarendall · #4 (**permalink**) 02-13-2007, 07:10 PM

I used the Ford Motorsport dip stick from Jegs, my dip stick goes in on the front of the motor, next to the alternator, no where near the headers

Trueoo7 · #5 (**permalink**) 02-13-2007, 10:50 PM

You must have an older engine.

jarendall · #6 (**permalink**) 02-19-2007, 02:06 PM

my block is a 302 HO, I guess there must be a difference between it and the later 5.0 block

zipzip · #7 (**permalink**) 02-20-2007, 10:32 AM

I took the freeze plug out of the timing chain cover (shown in picture) and moved it to the hole in the block. Then I could use the "fancy" Ford dipstick...