SPF engine choices

m5extc · #1 (**permalink**) 01-08-2009, 09:10 AM

Hi all,

Has anyone had any dealings &/or opinions with Performance Engineering Engines. They are in Ohio and have a decent looking crate motor 383 windsor putting out 415/400 hp/tq. They have decent pricing with a full "kit." Let me know if anyone has an opinion. Car is on the boat and will be here soon. I need to make up my mind very soon. I am located in the San Francisco bay area. Thanks.

Andrei

Stentor · #2 (**permalink**) 01-08-2009, 09:16 AM

From whom did you order the car, and who is doing the installation?

As you've seen in other posts, Eric (from Performance Engineering) is a good guy and has a solid reputation. But, there is a number of other engine builders who could be considered as well, depending upon your objectives and circumstances.

PANAVIA · #3 (**permalink**) 01-09-2009, 11:54 PM

Andrei- you can do the install yourself. -- if you can work on your M5, you can get an SPF going.

See sepp posts on engine choices.