Switching from pushrod to Coyote engine

[jessekershaw]

Hello,

I am interested in switching out a pushrod engine for one of the new Ford Racing Coyote engines.

I have chassis number: SP01758

From what I have read this is a Mk III chassis.

I have also read on here that the motor mounts and steering will have to be changed to those that Superformance sells with their modular kit.

I have verbally been told that this will not work without chopping up the chassis and major fabrication though I cannot find anything on here to support that.

I know that the Coyote is dimensionally almost identical to the 4.6L 4v engine and uses the same bellhousing bolt pattern as well as engine mounts.

If someone has done this or has a detailed list of what needs to be done I would greatly appreciate it. Any help is greatly appreciated.

This will be a winter project to swap over everything.

Thanks,

-Jesse