Anyone Have GASN Side Pipes on their Cobra?

[8Ball]

700.00?

[Blas]

Before doing anything, you better be sure the flange that connects to the heads are the correct version for your engine 8ball or else you bought paperweights.
Might also want to hear a video of them idling to be sure the baffles are still in place. Not sure what chassis number car they are coming off of, but get some detailed photos of where the pipes are joining as they exit the body. They tend to deteriorate there over time. And get some photos of the headers as they connect to the heads. Shipping is going to cost big too.
Blas

[BB 67 Corvette]

Originally Posted by 8Ball

700.00?

Thanks 8ball. Replacing the pipes will be a winter project as it will take about 6 weeks for the new ones to be made. The pipes only have 7,000 miles on them and the baffles are still in place. There is no deterioration. I will take a video of the pipes running before I take them off and will also send you whatever pictures you want to ensure the pipes will fit. Like I said, I am not doing this for a couple months and if you change your mind by then, no problem. I will give you the first shot as someone else PM'd me after you expressed interest.

[Blas]

Also be sure the 2 mounting tabs are in good condition. They can be replaced if you have a good welding shop when off the car. I notice a distinct line on the 4to1 adapter that would not be noticed on ceramic coated pipes. Could just be the weld line and paint burning off because of the thermal interruption of the weld between parts. Same on rear turn-out.
You both should share your Engine’s head info upfront. Someone here could tell you if the flanges will fit your cars engine easily....
Blas

[8Ball]

I already have a set of Stainless Fireflies with the 3" baffles, and stock Superformance modified, both a quite loud with my stroked bib block In fact on Cobra runs, I'm often told my car can be heard over several other Cobras that are running behind me. I'm looking for a set that is quieter for when Im in the mood for less noise
As long as they are Superformance side pipes, I'm sure they will fit my flanges My SPO is 2352
I'm in no bit hurry, so your schedule works for me

[8Ball]

if you could a few picks of the rear support brakets and where the side pipes connect to the header flange

[BB 67 Corvette]

Originally Posted by 8Ball

if you could a few picks of the rear support brakets and where the side pipes connect to the header flange

Will do.

[8Ball]

Originally Posted by BB 67 Corvette

Will do.

Thanks

[8Ball]

Are you still selling your sidepipes??