Blocking Air Flow to Oil Cooler

[RedBarchetta]

Bob is right. I also run an oil thermostat (Canton unit...see my gallery) and on cold mornings my oil temps still take quite a long time to get where they should be. I also use a clear plexiglass block-off plate that is held in place with two strips of velcro on either end. Clean looking and inconspicuous. It helps some.

-Dean #747

[392cobra]

Originally Posted by RedBarchetta

I also use a clear plexiglass block-off plate that is held in place with two strips of velcro on either end. Clean looking and inconspicuous. It helps some.

-Dean #747

That is exactly the way I do it as well.

As a matter of fact,I got the idea from your car when it was owned in Texas.

[BossCER]

Hey guys, check this out: http://beaumontmetalworks.com/index-perf-ap.html

I use this oil cooler bypass and am very happy w/ it. You dial in the amount of oil you want to go through your cooler (from 0 to 100%). You basically can decide what temp you would like your oil to be

[RedBarchetta]

Originally Posted by 392cobra

As a matter of fact,I got the idea from your car when it was owned in Texas.

But David is a detailer's detailer. There is no way he could have made that himself.