05-14-2010, 06:11 PM
|
|
CC Member
|
|
|
Join Date: Feb 2003
Location: Plymouth,
MA
Cobra Make, Engine: MidStates, 351C, 4spd, 9"
Posts: 405
|
|
Not Ranked
Brake screens...
Hi Mike.
A two part epoxy will work well if they are a tight fit. Rivets do work well providing that you use a like metal washer on the backside of the mesh, to prevent the rivet from pulling through. As long as the body is atleast 3/32
thick, you should be safe. If the body is real thin, you can use a washer on
the backside of the body as well.
Mike.
__________________
"It's not about getting from point A to point B. It is the point"
-J. James
M. Krause
1.508.944.3368
|
Threaded Mode
