09-04-2007, 06:03 PM
|
 |
Beam Me Up Scottie
|
|
|
Join Date: Aug 2004
Location: Squantum (part of Quincy),
MA
Cobra Make, Engine: SPF1049 Titanium w/black stripes, 351W with Trick Flow Heads, Tremec 3550
Posts: 7,592
|
|
Not Ranked
I'm not sure if that Spinner Eaze is any good for high temp. When I buy plugs, I normally get one of the small squeeze tubes of anti-seize they sell that are for plugs with aluminum heads. You only need a little.
There are many anti-seize compounds. The high temp version for spark plugs has some copper in it. But absolutely no anti-seize on the porcelain ... that will result in misfiring!
__________________
Warren
'Liberals are maggots upon the life of this planet and need to get off at the next rotation.' (Jamo 2008)
Last edited by wtm442; 09-04-2007 at 06:09 PM..
|
Threaded Mode
