Dallas CC: engine drop Wednesday pm! - Page 4

jshel1 · #61 (**permalink**) 09-29-2007, 06:10 PM

Congratulations Sam.

In spite of a few setbacks, I think you did it near record time.

Madmiles442 · #62 (**permalink**) 09-30-2007, 09:43 AM

Sounds great!
If you have all kinds of fluids leaking, then you probably have everything right. These things don't leak, they just mark their territory!

FST FOX · #63 (**permalink**) 09-30-2007, 01:55 PM

No problem, finally feeling better this cold / allergy kicked my but all week, was happy to see it start you won the poll between you and John, not by much but you still won

SSSammy · #64 (**permalink**) 10-01-2007, 12:48 PM

All dressed up, full tank, mirrors, seat belts, both seats, tunnel installed, cranked up to back out of driveway .. reverse gear won't engage

With only 30 min left till the appointment with the trooper, I called him and rescheduled for Wednesday afternoon.

Been fiddling with the Hurst linkage, thought I had it perfect, but didn't adjust reverse after it worked the first few times. Today it was different, it wouldn't go in. Need to untwiddle the shift rod, not a big thing.

Big thing is the oil leak off the back of the block. I wish it was a bad pan gasket .. but I'm afraid it's a rear main seal or possibly the manifold seal. Will investigate further after the Sat DCC debut luncheon.

Sam

Joe Wicked · #65 (**permalink**) 10-01-2007, 01:03 PM

Where is the luncheon at? I may try to make it out this time.

SSSammy · #66 (**permalink**) 10-01-2007, 07:29 PM

Joe, consensus on the location of the monthly meet is usually achieved about Thursday before the Saturday event

Just watch the Texas Forum and there will be a separate thread starting soon ..

Took the seats and tunnel out again and re-adjusted the Hurst linkage. Need a test drive tomorrow after work. Don't want to fire it up right now and upset the neighbors

It was sure nice to have a complete car today .. albeit just for a trip to the gas station

People were gawking .. I loved it ..

Sam

jshel1 · #67 (**permalink**) 10-01-2007, 07:56 PM

gawk |gok| - verb; stare openly and stupidly

I LIKE IT !!

SSSammy · #68 (**permalink**) 10-03-2007, 06:29 AM

10 mi test drive last night, shakedown in advance of the state inspection today! Yeeeeee Haaaaaa !!!!! Gawd what a beast! FE's r cule!

Didn't want to disturb my neighbors so went over to JRoss house and disturbed his neighbors. Figgered with John's car in the shop they'd be lonely

David Kee Toploader with the Hurst shifter is butter smooth .. fond memories of how they were back then

Remember that spring loaded "snick, snick" from 2nd to 3rd?

Oil leakage is indicative of a rear main seal, maybe it dried out over the year of sitting. I wouldn't think neoprene would do that. Also could be rear of the intake manifold, but less likely, or oil pan gasket. All fixable by me without pulling engine.

But I've ordered the gaskets and seals, so it's just work. Any one want to learn how to work on an FE, gimme a call! The fun starts after this weekend's meeting.

Sam

SSSammy · #69 (**permalink**) 10-03-2007, 06:34 PM

It's time for a scotch .. maybe two!! I have a real inspection sticker and tags, I followed the legal process, and did not lie to anybody

See my notes on the TX Registration thread .. We are making this harder than it really is. Note, my comments on that thread refer to a rolling chassis from a manufacturer, completed by the owner, as an assembled vehicle. Not sure how this works with a turn-key.

I did have a paper tag so I could have some fragrance of legality when I drove the 12 miles to Plano for the inspection.

Now to live the life ..

FE's rule!
Sam

jwoodard · #70 (**permalink**) 10-03-2007, 07:19 PM

Sammy,

Congratulations! I know you will enjoy driving your baby.

Joe Wicked · #71 (**permalink**) 10-04-2007, 04:00 AM

Congrats Sammy. Look forward to seeing the completed product.

Clois Harlan · #72 (**permalink**) 10-04-2007, 04:51 AM

I wish I could have been there to help with the process. Glad you are able to put her on the street. Have some fun ...It's your turn!

Clois

Bwana Snake · #73 (**permalink**) 10-04-2007, 05:48 AM

Sammy,

I know you have been waiting a long time for this moment congratulations look forward to seeing her complete.

Gary

Jim Jacobs · #74 (**permalink**) 10-04-2007, 02:28 PM

Congratulations Sammy - I'm really looking forward to seeing your new machine Saturday. WAY TO GO....

GYM

SSSammy · #75 (**permalink**) 10-04-2007, 03:55 PM

Thanks for all the good wishes, guys! Time to start thinking about a vanity plate

Sam

Madmiles442 · #76 (**permalink**) 10-05-2007, 09:48 AM

There's a thread in here somewhere "Cool Cobra Tags" - good ideas in there.

Um, would you like to talk about our little football game tomorrow?

SSSammy · #77 (**permalink**) 10-05-2007, 09:57 AM

Miles. you may have noticed my avatar is different in the few days leading up to the OU-TX game ..

I am well aware that I am surrounded by Longhorns in TX, so I will not make a provocative prediction

Both sides have something to prove this week

Grrrrr!!!

Boomer Sooner!
Sam

jdean · #78 (**permalink**) 10-05-2007, 09:57 AM

Sammy,

So glad you are finally up and running after all. Cant wait to see the silver and red in person.

John

SSSammy · #79 (**permalink**) 10-06-2007, 01:29 PM

Still need some carpet and mechanical sorting, but drivable, inspected, titled, and registered .. 3 weeks from rolling chassis delivery.

Sam

hey,littlecobra · #80 (**permalink**) 10-06-2007, 05:53 PM

wow. wow wow wow. way cool.

wow.