Goodyear billboards; let’s kick this dead horse one more time!

[Silverback51]

Originally Posted by Excaliber

I put a plug in one of mine a couple of years ago, come to think of it, maybe thats what's leaking now? I think it's the same tire...

I hear you Jamo, I'm driving real careful these days on 'em. Get the car to the boat and then the transport carrier and I'm good to go!

One nice thing about bias ply tires is that you can use a patch on them instead of plugging them.

Not sure if any tire stores still remember how to patch a tire or not.

[RedCSX1]

Originally Posted by Silverback51

One nice thing about bias ply tires is that you can use a patch on them instead of plugging them.

Not sure if any tire stores still remember how to patch a tire or not.

These are not good tires to patch in fact most store in my area refused to patch them. They consider them on time use. Have you looked at the inside of a bill board. Mostly thread material and the patch does not stick very well. First hand experience.

[Power Surge]

Originally Posted by RedCSX1

These are not good tires to patch in fact most store in my area refused to patch them. They consider them on time use. Have you looked at the inside of a bill board. Mostly thread material and the patch does not stick very well. First hand experience.

I had a screw in one of my rears, and had it patched from the inside a while back and no problems so far.

[Randy Rosenberg]

Originally Posted by Power Surge

I had a screw in one of my rears, and had it patched from the inside a while back and no problems so far.

I'm not sure I would admit to this on a public forum