change to hydraulic clutch

[sunservicefisch]

help !
after i changed the 3rd clutch cable in 4 month, i decided to change my classic roadster with 351W tko 500 cable clutch to hydraulic. did anyone know where i can get the easiest parts for hydraulic clutch and cooling up my brain ?

greetings

jens

[Mikey_P]

Mike Forte has a setup that I used with a 351w, TKO-600 and a lakewood bell housing. He also has one to fit the quicktime bellhousing. I believe he is a vendor here. I was very satified with the assembly.

[PANAVIA]

What bell housing do you currently have - ?

...depending on your bracket making talent, you could make a compressive pull type cylinder work like the willwood one look at my t56 article and you should get the idea.

Steve

[mpanten]

you can get it from Forte just make sure you tell him exactly what you have including the type of clutch, clutch fork, bellhousing, and transmission you are running. I had a heck of a time getting mine to work. No ones fault really just bad luck. Get the push system not the pull type. Also make sure you have the correct size master cylinder. Not sure if you need to change the clutch pedals on a classic roadster but most likely you will.

[lnfletcher]

I fabricated my own and am extremely pleased with it, and it costs less than $150.00!
http://lnfletcher.homeip.net/66Cobra/hydroclutch.html