Club Cobra Keith Craft Racing  

Go Back   Club Cobra > Engine Building, Tuning, and Induction > Weber Tuning

MMG Superformance
Nevada Classics
MMG Superformance
Main Menu
Module Jump:
Nevada Classics
Nevada Classics
MMG Superformance
Advertise at CC
Banner Ad Rates
MMG Superformance
Keith Craft Racing
MMG Superformance
MMG Superformance
March 2024
S M T W T F S
          1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31            
  #1 (permalink)  
Old 01-06-2023, 02:36 AM
CC Member
Visit my Photo Gallery

 
Join Date: Aug 2022
Posts: 2
Not Ranked     
Default 347 44 IDF choke size?

Hello.

I'm in the process of doing a initial setup on my 44 IDF carbs.
I will use them on a 347 with 10.3:1 compression, Comp Cams hydraulic roller, duration at 0.50" 224 int/232 exh, valve lift 0.555 int/0.565 exh, 112 degrees lobe separation, operating range 2200 rpm-6200 rpm.
The current chokes in the carbs is 36 mm, looking in the Weber tuning manual they seem to small.
I prefer a good street driveability before high rpm performance.
What do you think I should go for, trying the current 36 mm chokes or going for 38 or 40 mm chokes?
If someone has a motor with similar specs, please share your carb settings.

Regards Orjan.🙂
Reply With Quote
  #2 (permalink)  
Old 01-07-2023, 06:25 AM
wolf k's Avatar
CC Member
Visit my Photo Gallery

 
Join Date: Jul 2010
Location: Augusta, MO
Cobra Make, Engine: Sold ERA FIA 2139, 331 Weber IDF
Posts: 279
Not Ranked     
Default

I have a 331, slightly smaller cam than yours. Running 44IDF with the 36 chokes. Dynoed 308 hp at the wheels. This car has beautiful street manners, no bucking, no reversion, fuel injection-like smoothness.

Running stock jetting other than idle jets, using 52 idle jets. My engine was very sensitive to idle jet selection.
Reply With Quote
  #3 (permalink)  
Old 01-08-2023, 05:35 AM
CC Member
Visit my Photo Gallery

 
Join Date: Aug 2022
Posts: 2
Not Ranked     
Default

Hello.

Thank you for your input👍🙂, I guess the best is to start with the current jetting I have and go from there.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 01:25 PM.


Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: CC Policy
Links monetized by VigLink