Weber IDA AN Fitting

priobe · #1 (**permalink**) 10-05-2008, 12:12 PM

I recall seeing a setup with AN fittings on a IDA installed on a BB. The carb bodies are facing in and have enough clearance for the AN fittings.

I have tried buying AN fittings to do just that but had clearance issues.

Does anyone know were I can purchase these fittings to do the exact same thing?

Or what are you guys using for fuel connections for the IDA.

If you can post pictures that would be helpful.

Thanks

ENTDOC · #2 (**permalink**) 10-05-2008, 02:49 PM

here is my 427, I had the stainless hard lines made and used A?N fittings on the aluminum fuel blocks, Pierce manifolds has these.

ENTDOC · #3 (**permalink**) 10-05-2008, 02:51 PM

here is the 302 using AN fittings and startlite hose

sdonnel · #4 (**permalink**) 10-05-2008, 04:26 PM

As mentioned above, Startlite is a great choice. It's made by Aeroquip (Eaton) and looks as good as you could ask for (Just look at the above photos).

ENTDOC · #5 (**permalink**) 10-05-2008, 04:32 PM

I try to use Startlite every where I can, it just looks right and is much easier to work with than stainless braid