Looking for fuel injection system for my FE.

[SoTxButler]

I have an FE EFI 488". The manifold is from www.swartzracingmanifolds.com. I have high rise heads but he makes this for mid rise heads.

I am using an Electromotive TecGT ignition and throttle bodies from www.verycoolparts.com.

The system works very well...once the tuning is done. Check my gallery, some photos there.

[kobrabytes]

I have a twm/FAST setup on mine. Love the look! It came from Keith with a speed density setup. I've since changed it to Alpha N and had really good drivabilty. I live at about 4500 ft here in SLC and have gone up to 10,700 with no problem. (The TWM stacks only have about 6 lbs of vacuum at idle, which doesn't work too well with SD.)

I came up with a really good throttle cable setup also if you are interested. I'm sure the Kirkhams could replicate it if you don't have access to a machine shop.

Let me know if you want to chat.

len

[FUNFER2]

For the looks,.....the Dynatek is awesome, as the rails are underneath the intake. very expensive though.