Do I need an FE side oiler?

PHC1 · #1 (**permalink**) 06-13-2012, 04:54 PM

Quick question, any cooling issues with the iron sleeved aluminum blocks?

RodKnock · #2 (**permalink**) 06-13-2012, 05:11 PM

Quote:

Originally Posted by PHC1

Quick question, any cooling issues with the iron sleeved aluminum blocks?

Not if you keep your car in the garage like I do.

There are no known cooling issues related to the Shelby or Pond aluminum blocks.

My holy grail is an all-aluminum SOHC engine. I don't want or need any 50-year old cast iron parts.

BTW, Robert Pond is now in the testing stage of his new aluminum SOHC heads.

PHC1 · #3 (**permalink**) 06-13-2012, 05:15 PM

Quote:

Originally Posted by RodKnock

Not if you keep your car in the garage like I do.

There are no known cooling issues related to the Shelby or Pond aluminum blocks.

My holy grail is an all-aluminum SOHC engine. I don't want or need any 50-year old cast iron parts.

BTW, Robert Pond is now in the testing stage of his new aluminum SOHC heads.

Good one!

So Shelby or Pond no problem, good to know!

SoTxButler · #4 (**permalink**) 06-13-2012, 05:46 PM

Keith Craft will sell you one today for $38,000. Well known highly respected builder..all aluminum Pond block with Coon heads, Dove 2x4 manifold and ready to pump out big horsepower.

DanEC · #5 (**permalink**) 06-13-2012, 05:58 PM

I remember reading in Colin Comer's book that early CSX 3000 street cars used 427 center oilers before the 428 blocks. Are you sure any street roadsters actually came with side oilers? Maybe after they switched back to 427s?

DougD · #6 (**permalink**) 06-13-2012, 08:58 PM

Quote:

Originally Posted by DanEC

I remember reading in Colin Comer's book that early CSX 3000 street cars used 427 center oilers before the 428 blocks. Are you sure any street roadsters actually came with side oilers? Maybe after they switched back to 427s?

Good catch. The old wives' tale that "all 427 Cobras came with a side oiler" is my pick for the most-repeated lie about Cobras.

The truth is that a few more than 300 427 Cobras were made, and that the mix of engines was roughly 1/3 center oilers, 1/3 428 PIs, and 1/3 side oilers. So that 428 or center oiler is just as correct as the hallowed side oiler.

mdross1 · #7 (**permalink**) 06-14-2012, 03:59 AM

You need an FE if you really think you need an FE.As far as sound any motor with a given displacement of 427" will give you that sound you crave.Whatever you decide for style of block or ci make certain you have it built by someone with the experience and understands what you want for performance.Good Luck