Need 2 post lift recommend

[Bernica]

Originally Posted by RockBit

Good thought. If I can get the template for the lift before I have the floor poured, it would be better to set the j-bolts than hammer drilling the holes.

Make your own template easily. Just put a piece of plywood under the base plate and mark the holes. Then drill the holes in the plywood and double-nut the anchor bolts to it. Drop it into the footing and suspend it with some 1/2 or 3/4" strips across the hole. Center and square it and pour the footing. Just measure, then measure again!

[Jaydee]

I got a Molnar 2 poster and love it. But the ultimate is one without the base plate but an overhead joiner. What I plan to do with mine, so to make it less hassle to get the Cobra on and of. Is to install 4 rails across the arms, and have them lined up with the wheels. So I can just drive on and lift. I was thinking of using angle iron with the point sticking up so the smooth sides will rest against the tyres in front and back of the tyre. I'm making a large light weight frame hanging from the ceiling with the car cover strapped between it. So as the Cobra rises up, it will automatically go into the car cover. Will also avoid scratches, not having to drag the cover of the car.
My hoist is hydraulic. But I think most are screw thread now. I'm not sure which one I prefer?
JD