Engine Mounts for Pond aluminium FE.

[AC Ventura]

Originally Posted by RockBit

I also have a Pond aluminum FE. The motor mounts I used are Republic 31-2222 (right) and 31-2223 (left). They are 2 hole for mounting to the block. I have had no issues.

Thanks Chris. Do you know if these are still available? I cant see them online, only the Anchor 2222 and 2223 listed by Summit, although I'm guessing these must be the same ??

[RockBit]

Originally Posted by AC Ventura

Thanks Chris. Do you know if these are still available? I cant see them online, only the Anchor 2222 and 2223 listed by Summit, although I'm guessing these must be the same ??

The Anchor units look the same as mine. You can also search for Ford part numbers C3AZ-6038A,B. Those will work also.

ERA recommends drilling a hole though the rubber on the left mount and putting a 7/16 x 2 inch bolt through the mount with a stover nut on it for high Hp/TQ applications. This will keep the mount from pulling away from the rubber when the power is applied. If you search for ERA manual supplements (Google) this modification is shown.