Backdraft Racing Cobras

[Boudy]

Hello: My name is Robert of Hi-Per Rods and I am the Texas dealer for Backdraft Racing. I second most of the commentary but would like to add a little of my own.

SSS: Nope, there isn't a couple thousand in add-ons. $25,900 gets it all. Tranny mount, cooling lines, sending units, motor mounts, it's all there.

Nuke: The dash issue you mentioned has been taken care of.

The exhaust holes come out of the mold small and are cut with an air saw after motor is installed. 302 and 351 vary about an inch so instead of boring a monsterous hole one size fits all, the factory molds them small. I trim them 1/2 inch around the pipes. The air saw won't damage the paint edge aroung the hole, it cuts clean.

Contact Reg, he'll get you a tank shipped ASAP. Sorry to hear about that.

Do you need a new fuel cell or is there a fitting issue?

There are a few cars that had some paint imperfections, mainly due to growing pains. Sorry to hear that yours was one of them. However, the factory has made adjustments to handle the new volume of cars. Talk to Reg on the paint, we want you to be happy with your car.

I have also cleaned the glue on a couple trunk rims. I'll check to see if it has been addressed at the factory.

Thanks for the input. Backdraft is growing rapidly and customer input is greatly appreciated.

I haven't worked out delivery details with Rogers' car yet so I may or may-not be in your neighborhood soon. However, if there's anything I can do for you, please let me know.

EngineerMan: Buy one!!! You won't find another that drives and handles as well. No surprizes, $25,900 is the real deal. Attention to detail, paint & finish, quality, it's all there. I've got one going into Fresno soon, maybe you could get a look-see on that one if you like.

Thanks,

Boudy