Car Dies – Diagnosis Appreciated - Page 2

CobERA · #21 (**permalink**) 07-23-2007, 01:44 PM

Patrick,

I am using an MSD-8200, which is oil filled. I just pulled the installation instructions and found the section on mounting orientation. It does look like mine should be mounted vertically. So to eliminate one possibility, I'll either find a way to vertically mount the coil or buy an 8222.

Thanks,

Chaplin · #22 (**permalink**) 07-23-2007, 01:53 PM

Rick-
If you have the edelbrock cylinder heads, there is a bolt hole on the front of the driver's side cylinder head- mount the coil bracket to that hole and you will be good to go.

CobERA · #23 (**permalink**) 07-23-2007, 01:57 PM

Chaplin,

I have iron CJ heads, but I think there is a bolt hole on the driver's side front. I'll check tonight.

Thanks,