06-09-2009, 07:06 PM
|
 |
CC Member
|
|
|
Join Date: Mar 2006
Location: San Marcos california,
CA
Cobra Make, Engine: 1989 KCC from South Africa Right Hand Drive
Posts: 1,605
|
|
Not Ranked
I have a KCC from S.A. with Series one Jag front end. The Shamrock has series 2 with ventilated discs and 4 piston calipers . The stock Jag rear shocks had two positions on the shock (at the bottom side) at which the spring plate could be installed and the front spring is just a rear shock and spring unit from the Jag.The Jag also uses two different rate springs on each side at the rear, so you can play with the settings a lot.Also the jag stock bushings are really bearings on the top control arms. Brake rotors should be stock GM units.
|
Threaded Mode
