Garage Update # 3

stephen low · #1 (**permalink**) 10-12-2009, 07:13 PM

And if you want some extra special attention to quality, don't forget those green inducement packages too!!

The standard trades rate of pay - and now it seems Bathurst has made parity on this issue too!!

PCC · #2 (**permalink**) 10-12-2009, 07:35 PM

Stiff,

Its form up the slab

Looking good - hope the rain stays away.

Switch to 40MPA and you'll be right - just may need an extra labourer or two

stiffy · #3 (**permalink**) 10-12-2009, 11:27 PM

PCC,

It is 25MPA X 150MM thick,

The 2 poster is in the middle of one of the footings therefore it will be in
500mm of concrete...... SAFE.....

STIFFY

PCC · #4 (**permalink**) 10-12-2009, 11:44 PM

6" is fine - 2 layers of mesh?

stiffy · #5 (**permalink**) 10-13-2009, 01:10 AM

PCC,

One layer of F92 plus the stuff in the footings.

You seem to know a bit about concrete, are you in the game??

STIFFY

PCC · #6 (**permalink**) 10-13-2009, 01:17 AM

Yep

Bit bigger pours though - 1,000 m3 not unusual

stiffy · #7 (**permalink**) 10-13-2009, 01:26 AM

PCC,

I had enough problems with my small garage (17m x 9m) the neighbours have been giving me HELL since I moved in,,,, or was it that I asked their daughter out

Either way they are pi$$ing me off.......

STIFFY