Mass-Flo systems

[TUF-427]

Hey Merv you may have misunderstood my previous posts a little,

I meant retaining all the electronic and wiring side of things as you already have whats required,

and just getting what Wrench87 has just described off massflo,

Modified Carb style Intake with injector bosses and fuel rails,

the Massflo throttlebody and MAF,and the Massflo harness/convertor adaptor .

Having a chat with the Massflo guys is a great idea,
tell them exactly what you already have and what you want to achieve and im sure they will suggest the best option..

Personally for me its gotta be 8 throttlebodies!

Peter..

[Krait]

Originally Posted by TUF-427

Personally for me its gotta be 8 throttlebodies!

I like your thinking Peter

Cheers

[wrench87]

thats the one, the one thing you must know is this type system is speed density and does not use a mass air meter. depending on what engine management system you use you can get rid of your distributor and use a oil pump drive and coil packs. i have the mass flo on my 342 and it runs great, but you cant beat the looks of the 4 two barrell systems.
i think profesional products makes a system also that comes with a controller that is self learning with a single wide band 02 it has the 4x2 t bodies i think it is under retrotek?.

[wrench87]

the other 2 options are the fast ez efi, and the powerjection III. you should also check them out easy to install especially if you already have a efi pump and a return stlye fuel regulator, once again they are speed density but they use a wide band 02sensor and are self learning.