Mustang 4.6L Starter - source!

Route 66 · #1 (**permalink**) 12-11-2012, 09:48 PM

Hi All,

Can anyone give us a lead on where we could source a Mustang 4.6L starter motor. We have a Boss 260 5.4L quad going into our project but it requires the alternate starter to be relocated to oposite side of the block and direction. We have the relocation mount kit and instructions and just need to source a starter. I would prefer to just source one locally in Brisbane and/or SE Qld if anyone can give us a suggestion. I have tried a couple or wreckers but have come up empty.

Regards

Route 66

sideshow · #2 (**permalink**) 12-12-2012, 03:29 AM

ebay
buying anything in australia sucks asss

or maybe try eagle auto parts
but most shops would prob import one for u so its easier to get oen of ebay

can u run a ford 5.4 starter

letsboogie351 · #3 (**permalink**) 12-12-2012, 01:57 PM

I got my 5.4 starter through a local ford dealer .....ON Ebay

Aussie Mike · #4 (**permalink**) 12-12-2012, 04:46 PM

It's a bit far south but Castle Auto electrics list one on their web page/
www.caenterprises.com.au - The CAE PERFORMANCE PRODUCTS pages lists our Catalogue and Products.

http://www.castleauto.com.au/hs_dbas...YtMTkxMC5qcGc=

Route 66 · #5 (**permalink**) 12-12-2012, 08:33 PM

Quote:

Originally Posted by sideshow

ebay
buying anything in australia sucks asss

or maybe try eagle auto parts
but most shops would prob import one for u so its easier to get oen of ebay

can u run a ford 5.4 starter

Hi Sideshow,

The 5.4L starter is different, it mounts on the passenger side of the bellhousing and points backwards and wont fit in the DRB. DRB have a pretty major mod of an adaptor plate and few bits so that it takes the 4.6L bolt pattern and points forward on the driver's side. It is a little complicated but doesn't look too hard even to me. Just requires a bit of a mod to the bellhousing.

While I could no doubt buy many parts for the project cheaper OS, I am not a mail order kind guy. I like to walk in with my cash and walk out with my parts in my hand and start bolting it together. At the end of the day however I will probably end getting some bits that way!!!

Regards

Route 66

Rob. Smith · #6 (**permalink**) 12-13-2012, 02:58 AM

SUMMIT RACING ?? have a look at them. They also sell OEM stuff too.

Aussie Mike · #7 (**permalink**) 12-13-2012, 06:36 AM

Quote:

Originally Posted by Route 66

I like to walk in with my cash and walk out with my parts in my hand and start bolting it together.

I used to be that way too but the savings you get from ordering online have convinced me otherwise.

You might also want to have a look at this thread.

Bloody Australian Retail

Cheers

letsboogie351 · #8 (**permalink**) 12-13-2012, 01:33 PM

Engine Master Australia
32 Fallon Street, Albury, NSW

Telephone: 02 6025 5666
Fax: 02 6025 5622
Web: Engine Master Australia
Freight:ashleigh.enginemaster@live.com.au
Sales: albspeed@hotmail.com

STARTER MOTOR FORD V8 3 BOLT ZINC CAL3557 - FED7533N

Specs:

Application: Ford 86-2002 EFI 3 Bolt Suits Falcon BA/ Mustang 4.6 5.4LTR

Currently advt. on ebay $145.00 +$16.50 p&h