
05-14-2007, 07:48 AM
|
|
CC Member
|
|
|
Join Date: Feb 1999
Location: Lexington,KY,
Posts: 513
|
|
Not Ranked
I had a problem getting pedal pressure on my E-M.
It turns out that I was not getting a full stroke on my tilton brake cylinders and therefore, not pushing enough fluid through the system.
My setup has threaded connectors that attach to the pedal. After I backed the connectors off a few turns the pedal was able to push the plungers in the brake cylinders through a full cycle and my problem was solved.
Hope this helps
__________________
Roger
|