That other guy named Ed and DVs CRII build

[Double Venom]

Ed,
Weve taken care of everything via e-mail or phone. Thought I would bring you up to date on the frame, etc.,
Firewall is finshed off, totally sanded past the wet sand-next in about 15 minutes will be paint. Door brackets have been cut out of the cowl, ground down and ready to install when the body and doors arrive. Radiator hoop is in. Cowl bar is bolted and welded in with three "Dedicated" 1/4x20 ground lugs welded in place. Inner caps on the front towers have been cut out in anticipation of Terrys QA-1's and his super front suspension arriving. I will paint all the brackets, pedal box, hinges etc, today and install tomnorrow.
Moving right along.....Lots of pictures taken!
DV

[capteddie]

Thanks for the update DV!!!

You should have some stuff showing up on your door step this week

1) Steering column and push button starter from Flaming River
2) Wiper motor/kit from Finish Line
3) remote oil filter kit from Finish Line
4) Heater box from Vintage Air.
5) Tie rod ends and 5 point harnesses from Summit

The radiator was ordered from Evans yesterday, but they are quoting around 10 days for delivery. The seats showed up at my house yesterday and will make the trip over with me, when I bring the body. The Spal fan and relay kit was ordered from Speedway, but the relay is back ordered till the 1st. week in June.

I talked to Terry yesterday and he said the front suspension and all the lights are headed your way. I'll try and stay on his tail until you tell me they showed up. Talked to the guy making the new lower rear arms and he's a little behind schedule, but said he'd try and rush them through.

That's about it for now. I'll be picking the body up from my body guy on Friday June 6th and will be at your place with it mid morning on June 7th.

Let me know if I need to get you anything else.

This is getting exciting!!!

Cheers,
Ed