Hurricane HMS2002 build thread part II

gsharapa · #1 (**permalink**) 07-14-2010, 07:19 PM

Hey Dean,

Nice pic Paul took.......where did you get the expansion tank and stainless water upper and lower lines at?

dlampe · #2 (**permalink**) 07-14-2010, 09:45 PM

I know I haven't taken to many shots lately. You guys know how to cut braided lines and bolt on engine goodies. Thats why I haven't been taking pictures of all the little stuff. The finished product is going to look awesome. I'll post some engine shots soon.

Gary, the stainless tube is 1.65 inch from Jegs. The expansion tank had to be built for me from a regular vintage tank I bought on Ebay. It had to be turned and shortened. I had a local radiator shop do the work.

gsharapa · #3 (**permalink**) 07-15-2010, 07:25 AM

Thanks Dean,

Car looks awesome can't wait to see the finish product....finally got my car 2 weeks ago and starting to purchase lots of stuff for it. Haven't ordered an engine yet but should shortly.......keep us updated with some finished pics!

dlampe · #4 (**permalink**) 07-18-2010, 03:38 PM

I need one of you Hurricane guys to give me a call. I have a wiring question and I need you to check your fuse box. You will need an electrical tester.

618 322 6046

dlampe · #5 (**permalink**) 07-18-2010, 09:27 PM

Thanks for your help Paul. That wire is ran through the neutral safety relay and if you don't use the neutral safety switch you will need to bypass that relay with the solenoid wire.

PaulProe · #6 (**permalink**) 07-20-2010, 05:41 PM

Quote:

Originally Posted by dlampe

That wire is ran through the neutral safety relay and if you don't use the neutral safety switch you will need to bypass that relay with the solenoid wire.

Dean
Glad I could help out.

To other Hurricane builders, if you need a wiring diagram of the Haywire unit, I have a wiring diagram of the Haywire box on my site. The company doesn't offer one so I had to reverse engineer this so I could trouble shoot some issues.

Paul