Blown LS3 Build

tkrupinski · #1 (**permalink**) 01-22-2015, 04:34 PM

Drive Shaft Shop got the shaft done and it fit great. They use a CV style joint on the front to mount to the TR6060 and a 1350 joint to mate to the nine inch rear. CV will move in and out for wheel travel and hopefully be vibration free. Some pics.

PLDRIVE · #2 (**permalink**) 01-22-2015, 08:32 PM

Nice build!

tkrupinski · #3 (**permalink**) 01-31-2015, 06:43 AM

Quote:

Originally Posted by PLDRIVE

Nice build!

Thanks. All the wiring is done and everything seems to be working including the ECU. Made a bracket to mount the drive by wire pedal and a clutch stop. Now onto the brakes. Calipers are mounted and hopefully I will have brake lines installed and and brake working this weekend. Wheel should be here in a couple of weeks and then off to the Dyno for tuning.

tkrupinski · #4 (**permalink**) 02-08-2015, 06:38 PM

Finished the fuel tank and lines. Mounted catch can and plumbed the radiator. Tuner is supposed to make house call next weekend so we can fire it up.

Paintwerks · #5 (**permalink**) 02-09-2015, 03:05 AM

Awesome!! I will be watching this thread with great interest.

Great to see another Chevy powered Cobra!FYI, I am currently building a Pace aluminium/aluminum chassis 427SC Cobra powered by a ZL1 LSA and MG9 TR6060. Will be about 2200lb ready to rock. Fun times lay ahead.

Out of interest, have you considered fitting traction control?

tkrupinski · #6 (**permalink**) 02-09-2015, 03:29 AM

Quote:

Originally Posted by Paintwerks

Awesome!! I will be watching this thread with great interest.

Great to see another Chevy powered Cobra!FYI, I am currently building a Pace aluminium/aluminum chassis 427SC Cobra powered by a ZL1 LSA and MG9 TR6060. Will be about 2200lb ready to rock. Fun times lay ahead.

Out of interest, have you considered fitting traction control?

Do You have a build thread that I can check out? Would like to see another LS build. Traction control? It could be done but would be a lot of work. Are you planning on trying to install it on your build? If so I would be very interested in checking it out. I opted for the right foot method, lol.

Paintwerks · #7 (**permalink**) 11-21-2015, 04:22 AM

Quote:

Originally Posted by tkrupinski

Do You have a build thread that I can check out? Would like to see another LS build. Traction control? It could be done but would be a lot of work. Are you planning on trying to install it on your build? If so I would be very interested in checking it out. I opted for the right foot method, lol.

Hey there.

Sorry for the looong delay in responding as I just saw your response to my post. My bad!

Per your request, here is my build thread:

Paintwerks' Absolute Pace 427SC build thread

Have decided against the traction control setup at present.

Cheers,
Sime