Tremec Transmission Mounts for ERA

joea · #1 (**permalink**) 12-06-2003, 08:19 AM

Anyone know which mounts are needed for a Tremec? It is not listed on the ERA Parts page

REDSC400 · #2 (**permalink**) 12-06-2003, 08:44 AM

Hi Joe:
On Page 22 of the Parts Needed it says for the Tremec TKO 5 you need a spacer from ERA and on page 13 it says you need an adapter plate that works with an unidentified Chevy mount. You also need right hand speedometer driven gears.

However, I do not see a specific mount part number called out.

strictlypersonl · #3 (**permalink**) 12-06-2003, 10:06 AM

It takes the same mount as the Richmond Gear: Republic 31-2224. I guess I'll have to be less ambiguous (and cheap with manual words...).

joea · #4 (**permalink**) 12-06-2003, 06:04 PM

Details!.....thanks!

Chaplin · #5 (**permalink**) 12-06-2003, 09:23 PM

Joe-
You need the mount and a separate adapter that you get from ERA. Be sure to tell Peter that you are using a Tremec and he will add the adapter to your invoice.

joea · #6 (**permalink**) 12-06-2003, 10:02 PM

OK thanks...I will call him this week