03-12-2008, 09:08 PM
|
 |
CC Member
|
|
|
Join Date: Mar 2004
Location: miami,
FL
Cobra Make, Engine: E-M Cobra Ford FE 427 w/ Webers 48 IDA
Posts: 1,383
|
|
Not Ranked
Thanks for the feed back
This cam spec cam directly from Comp Cam which now owns Inglese. I spoke to Chuck at Inglese which worked with an Engineer over at Comp to come up with this spec out cam.
The cam which was in the more before was 245 /250 660 lift 112 LSA
This cam has to be mechanical because it is a 66 block.
From the looks of it, this is more cam than what I previously had and the motor was very tamed.
If figured if Keith C. gets any information it will be from Inglese on recommendation for cams with Webers. I have spoken to several people and when it comes to specifics with Webers many shy away.
I have heard that Comp Cams are pretty much right on the money with cam specs and I dont know of anyone that knows more about Webers than Inglese.
True it is under new ownership but my faith is with Comp and what I previously had inmy motor.
I am learn about cams and these FE motors which is why I am posting this thread.
If I am in correct please correct me.
|
Threaded Mode
