06-02-2005, 05:44 PM
|
|
CC Member
|
|
|
Join Date: Aug 2003
Location: League City,
TX
Cobra Make, Engine: Shell Valley, Shelby Aluminum 427, stroked
Posts: 77
|
|
Not Ranked
FinishLine sells a slave cylinder kit which mounts the cylinder on a bracket and the bracket to the block/bellhousing interface. It's clean and compact. It's also $175.
I didn't purchase the kit, but I duplicated it with some 1/4" flat stock, a slave cylinder from NAPA, and an afternoon of cutting, shaping, and fitting. Total cost was about $75, including stainless fasteners.
Instead of the mockup drill bit you see here, I purchased a CNC pushrod ($13, I think) and cut it down to size.
Tim
|