Pedal Box

elgecko · #1 (**permalink**) 08-03-2006, 06:40 AM

alfy65,
After months of consultation between us scratch builders we have come up this detailed drawing that should help. Please call for help anytime.

Just kidding.

One or two drawings that I have are copyrighted, so I'm not sure of the legality of putting these on the site.
Will PM you later.
Dave
elgecko

mickmate · #2 (**permalink**) 08-03-2006, 10:21 AM

Dominik · #3 (**permalink**) 08-03-2006, 10:45 PM

g'day!

there is a bit of progress: after some "scratching" I found the drawing.
but they are too big (A3) for the fax machine, so I either have to reduce them in the copy shop or cut them in pieces...

Or check my files on someones PC, because my new mac is not partitioned for PC yet.

domink

oldboy001 · #4 (**permalink**) 08-07-2006, 09:57 PM

If you want to take the easy way out, Tim Gunning has a complete box (less the pedals and balance bar) for sale for $90. He also has the pedals, balance bar, push rods, etc for the box. You can reach Tim at:

bestof65@azci.net

Scott

NOSMS · #5 (**permalink**) 09-04-2006, 12:08 PM

Did the measurements make since. I did the drawing pretty quick. If it worked out I can see about posting a PDF for those who can't read CAD files.

Mike