Club Cobra

Club Cobra (http://www.clubcobra.com/forums/)
-   Scratch Builders Forum (http://www.clubcobra.com/forums/scratch-builders-forum/)
-   -   i'm going to start manufacturing of bodyshell, but slabside or fia ? (http://www.clubcobra.com/forums/scratch-builders-forum/79118-im-going-start-manufacturing-bodyshell-but-slabside-fia.html)

rustyBob 04-07-2011 11:47 AM

still going with black with white stripes ???

Ozgur_Tan 04-07-2011 11:59 AM

yes, black w/ white (or silver) stripes
and side pipes will be done also

Quote:

Originally Posted by rustyBob (Post 1121352)
still going with black with white stripes ???


Ozgur_Tan 04-14-2011 01:02 PM

side pipes are done
stainless steel heat shield will be done
#2 running fine

rustyBob 04-14-2011 02:23 PM

Black (gloss) with Black stripes (satin finish)?????

Ozgur_Tan 04-14-2011 02:37 PM

hmm
satin finish like i've done on my other project car
audi a6 4 door>2 door, lexan roof, golf brake lights, relocated reg. plate, cleaned sides etc.

http://lh3.googleusercontent.com/_V7...0420113051.jpg

Quote:

Originally Posted by rustyBob (Post 1122757)
Black (gloss) with Black stripes (satin finish)?????


ThePanelbeater 04-14-2011 03:15 PM

Like the look of the slabside in competition form. Enjoyed putting the new nose on the CSX2011 before it was sold.

rustyBob 04-14-2011 06:01 PM

Go for it Ozgur......you do some fine work.....the a6 looks darn good....

Ozgur_Tan 04-17-2011 05:08 AM

Thank you Bob

Quote:

Originally Posted by rustyBob (Post 1122802)
Go for it Ozgur......you do some fine work.....the a6 looks darn good....


Ozgur_Tan 04-17-2011 05:10 AM

playing with hardtop on #2
i've to widen hardtop 60mm

http://lh5.googleusercontent.com/_V7...0420113087.jpg

rustyBob 04-17-2011 07:16 AM

Are those bodies in the background for #3 and #4......you are a busy man....

Ozgur_Tan 04-22-2011 11:16 AM

No
I did not decide yet for those bodies
#3 will be 60mm widen body as #2, but engine move 300mm to rear

Quote:

Originally Posted by rustyBob (Post 1123211)
Are those bodies in the background for #3 and #4......you are a busy man....


Ozgur_Tan 05-26-2011 01:15 PM

hi
here it's
my latest seat
version 3.0

https://lh3.googleusercontent.com/-p...0520113226.jpg

rustyBob 05-26-2011 08:34 PM

nice work...

Ozgur_Tan 05-27-2011 01:14 AM

thank you bob,

same fiberglass seat shell that I've modified from offshore racing boat
but finished appearance changed drastically with upholstery design from V1.0 to V3.0

peace,
ozgur

Quote:

Originally Posted by rustyBob (Post 1131283)
nice work...


*13* 05-27-2011 07:18 AM

Looks really vintage & clean. Looks like it had a little more padding?

Ozgur_Tan 05-27-2011 09:13 AM

100% correct
in this version,
it has got more padding and my goal is to make more traditional

Quote:

Originally Posted by *13* (Post 1131337)
Looks really vintage & clean. Looks like it had a little more padding?


Ozgur_Tan 05-29-2011 03:55 AM

hi,
i'm playing with the configuration of #4

tilt front
6cm extended wheelbase
up to 10 years old child seat with cover when unused
gas tank under trunk
fastback hardtop

Ozgur_Tan 07-27-2011 11:27 PM

this time;
wheelbase 92.4"
engine moved 20cm to rear

https://lh5.googleusercontent.com/-r...2015.59.00.jpg

*13* 07-28-2011 06:26 AM

Your wheels are looking a little Marty Feldman. Is this a cobra body as well?

Ozgur_Tan 07-28-2011 02:16 PM

hi
she has got standart 235/75R15 tires with O/D 29", but 245/45R17 front and 275/40R17 rear tires will give O/D 26".
spring rate and length will be changed according to reduced weight.
yes, she will get cobra body

Quote:

Originally Posted by *13* (Post 1143062)
Your wheels are looking a little Marty Feldman. Is this a cobra body as well?



All times are GMT -7. The time now is 08:47 AM.

Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: