i'm going to start manufacturing of bodyshell, but slabside or fia ?

[jberg]

Originally Posted by bomelia

Oz, how did you "skin" it?


I look at that and think you don't need a 2-axis cnc (though one is nice). Just a way to print full size blue prints and lots of jig saw blades (or a bandsaw with an enlarged table).

I am interested in doing this... just looking for advice.

I've seen some 3d models (suggested in this forum) for the 427.

I start from 3D-model an then I use that "blue prints jig saw" method as you mentioned abowe. I fix two plywood together and saw lef/right part at the same time because those are mirror of each other. That way I save a litle bit of time and needed plywood size was not so large (easier to handle).

But I have to say that Ozqur method is much better and I don't know is there much difference in prize affter all if you use some company to made those bye CNC machine.