Carb cars what fuel pump are you running..

[jwoodard]

Aeromotive Street Rod Pro Billet Pump - 150 GPH

[392cobra]

Originally Posted by jwoodard

Aeromotive Street Rod Pro Billet Pump - 150 GPH

Hey Jim,
Still like it as much as when you first got it ?
Is this the one that requires a regulator ? P/N AEI-11203
"Street/Strip"

Been checking Jeg's & Summit and that don't have a Aeromotive listed that says "Street Rod ".

They have one that says "Pro Billet" & "High Output" (same pump) and doesn't use a regulator and has a lower volume,P/N AEI-11209

[rcassidy]

I don't have much experience with the other pumps, but I'm on my second Aeromotive pump (Street/Strip one) and I will say it's rather noisy. Sometimes you can hear it over the sidepipes, but mainly just while idling. The first one took a dump on me after about 150miles so I think it was defective from the factory. No big deal, it happens. The new pump changes loudness to over a drive so I'm a little leary of it. I have all the proper filtration in place before and after as well.

I was actually surprised how noisy it was. I'm considering trying another pump that might be a little quieter or shall I say consistant on it's DB level :-)

This is my first experience with Aeromotive. Not saying it's bad as I have nothing to compare it to. I don't know, just trying to provide you with enough data points to make a decision.

Cheers,

[jwoodard]

rcassidy,

You can help minimize the noise level by placing some rubber insulation between the pump and your frame or whatever it's attached to.

Fred,

Yes, I am still very pleased with my pump, and yes, it does require a regulator. I got it from Rob at Keith Craft in Plano.