Carb cars what fuel pump are you running..

[rblong]

KC told me to use the Holley black with 1/2 inch tubing to feed 600 HP - don't know what your running HP wise.

[392cobra]

Thanks Jim. Are you running a 1/2" fuel line ?

Originally Posted by rblong

KC told me to use the Holley black with 1/2 inch tubing to feed 600 HP - don't know what your running HP wise.

Bruce, I making 602 hp.I kind of thought that 3/8" would be too small for sustained high rpm. Even to the end of a 1/4 mile blast.

The fuel tank outlet on our LSC's are 3/8",I think.If you increased it to 1/2",how did you go about it ?

[undy]

Originally Posted by 392cobra

Thanks Jim. Are you running a 1/2" fuel line ?




Bruce, I making 602 hp.I kind of thought that 3/8" would be too small for sustained high rpm. Even to the end of a 1/4 mile blast.

The fuel tank outlet on our LSC's are 3/8",I think.If you increased it to 1/2",how did you go about it ?

not Bruce, but...

The fitting bung on the bottom of the LSC tank is 3/8" FPT. All you need is an 3/8" MPT x 8AN (or 1/2") 90 degree fitting to replace the old one with. That's what I installed in mine. While you're doing the work you might want to plumb it up for a return system. It may save future headaches.

Dave