10-14-2010, 07:51 PM
|
 |
CC Member
|
|
|
Join Date: Feb 2006
Location: Gilroy,
CA
Cobra Make, Engine: SPF 2291, Whipple Blown & Injected 4V ModMotor
Posts: 2,742
|
|
Not Ranked
Build it the way you want it
Quote:
Originally Posted by Paul F
Thanks for the input all.
Jim, I looked at the Cantons at Summit and they all are 8" depth vs the 7.75 stock. Do you have a part number?
|
Paul,
Click the gallery icon next to my avatar and look at the home made pan in my gallery. At the rear it is 4.5" deep and a the front it is 4" deep. It comfortably holds 10+ quarts of oil. There is a oil control baffle, trap door and swinging pickup inside all covered with a windage tray.
Total cost for the pan - less the swinging pickup was $300 including the powder coating. Give some thought to doing it yourself. It is amazing what you can build with a water jet or laser cutting job shop around your house.
Ed
__________________
Help them do what they would have done if they had known what they could do.
Last edited by eschaider; 10-14-2010 at 08:02 PM..
|
Threaded Mode
