
02-25-2017, 08:48 PM
|
 |
CC Member
|
|
|
Join Date: Feb 2012
Location: Keller,
TX
Cobra Make, Engine: Lonestar Classics LS427. Self-built 408W, AFR 195 heads, Performer RPM Intake, Quick Fuel 750, 407rwhp, 479rwtq
Posts: 549
|
|
Not Ranked
Quote:
Originally Posted by blykins
Did you check coil bind clearance while you had the heads off/apart?
|
Installed height is 1.8 - verified with micrometer.
Lift is .602 - verified with dial.
Coil bind for these springs is 1.080.
Installed height - lift at valve - 1/4 turn preload =
1.8 - 0.602 - 0.012 = 1.186.
1.186 - 1.080 = 0.094
So I have .094 coil gap. Right?
Last edited by Texasdoc; 02-25-2017 at 08:59 PM..
|