PANAVIA's DAYTONA COUPE BUILD THREAD - AKA Car #54 where are you >?

[PANAVIA]

Big news ; The coupe is finished ! #54 made it to Monterey in August , drove herself 500 miles during car week with only minor teething issues to report, she has over 600 miles on it now , and I have revised a few key items, like the placement of O2 sensors and the charge wire routing from the alternator to the core bus on the fuse block. ( we also had a power steering hose pop off due to a hose clamp. - no biggie!

The best part of the week was multi fold -

Doug Campbell ( coupe 88 ) and Peter Brock were waiting for me at the drive way of the hotel on our way in - and greeted #54 with applause , keep in mind we had final allignment done earlier that day and our testing was 2 Laps arround the shop , a short drive to the gas station and back, and then 87 miles driven to Monterey.

Note - she got 23 mpg on the way down to Monterey !

Newly designed clutch and Big-Brake setup work well, in fact we are now able to perform that brake update in house at Panavia now, takes about a week to get it done to your Daytona Coupe. There are minor variations in chassis so we have found, but we can overcome them.

The car was on display at the Baja cantina event , and went over very well. Lance caught up with me on hwy 1 , and rolled down his window and was cheering #54 !!! It's on the road !!! Lance and I flew in tandem to Baja Cantina - for the Thursday gathering.

Bob and Pat Bondurant came by during Baja and Bob was very complementary of the coupe , as it is wearing #54 as the nerburgring car of 1965. Bob sat in and geeked out with me on the touch screens and insides and signed my dash !

#54 was on display with 16 of her breed at the Monterey Jet Center Party , where she has shown up in many news photos of the event , which makes us feel quite proud of what we have accomplished.

Saturday was great at the track , wish I could have been part of the parade lap , but there were just too many cars, and there were many people that wanted to be on the parade lap worse than I, - so next time !

I am moving to a new machine and will finally have enough room to have my photos all in one place , so I can host and show all the interesting things we can do and have done -

There are things I need to revise and update, and I think eventually I will be putting in a set of rossion or noble seats ( version of a sparco ) but for right now , we are working on some driveability points and suspension tweaks, I have re-valves a set of bilsteins to work with the setup we have. Keep in mind we have revised some of the front end geometry to be closer to the original design intent and there is some tire rub issues I am working through on my example.

Photos on their way - will try to update later this week !