IDF spacers?

[J Persons]

Look at the photo posted by Derald Rice in the "Weber Filters" thread, He has a set. If you find where he got them, please post as I would also be interested in a set.

[zimmy]

Spacers can be purchased from:

http://www.mazdatrix.com/r-11.htm

[carmine]

I think you might find something at www.pricemotorsports.com

[Derald Rice]

I need to check back more often. The spacers I used are Inglese, part number is NG-1013, 25.00 each. They are 1 inch spacers. The IDA's and IDF's use the same bolt patern, but the spacing is different between the throats. If IDA spacers are found, they can be cut into seperate throats and then used.
Derald.

[carlmb]

I am more confused now. I called Inglese to order the ng1013 spacers and they said that they would not work with the IDF's. I was told that even if I cut them apart that the bore diameters and bolt patterns were different and would require reboring and redrilling to work and that it would be easier to machine my own.

[Derald Rice]

NG 1013 do not come as pairs. They are singles, and the bolt patern is the same as IDA"S. NG1013's are an IDA spacer acording to the box (which I still have). When you call, ask to speak with Maxwell.

[Derald Rice]

Just got off the phone with maxwell, they currently only have 4 iNG1013 in stock, he is going to get back to me with a restock date. In the meanwhile, I just picked up another set of 48 IDF's from redline that were supposed to have spacers included. Spacers were not with the kit, and bud stogey at redline is making up a set that I should have by mid-next week. I will let you know about those when i get them.

Derald.