LED front head lamp replacements

[joyridin']

I tried it, but you need a headlight closer to the design of the newer vehicles. If your glass is cut or molded, the LED lights do not work correctly. You need clear glass.

You can buy a few brands that have clear plastic/glass and they will probably work fine. On another note, there are some pretty hefty halogen lights out now like these:

https://www.amazon.com/Philips-Racin.../dp/B01LYNVQBC

They are amazing although life is a bit short, but on a Cobra, that might be 10 years worth of driving.

[Blas]

Take a few mins. and check the voltage being supplied to each headlight compared to your cars general wiring. 12 volts + makes a big difference.
If your lenses are not sealed beams and have replaceable bulbs, are the lens’s milkly looking on the inside. Clean them with dish detergent and a small piece if towel and a chop stick. Rinse well and then swish rubbing alcohol inside to displace water. Dry well before reassembly. You might need to do it twice to get them like-new looking.
Blas