Okay guys..you've been extremely helpfull in my previous post. Now, I need a clutch pressure plate recommendation. I have a Superformance that will get the engine tranny swap as soon as all the parts I've order come in. Engine 408w approx. 550hp and a little less torque. I'm replacing the tko 500 with a 4617 tko 600 with .82 overdrive. I plan on using the stock bellhousing with the hydraulic clutch setup. I'm not reving to the moon nor will I be banging gears. Anyhow, I would like to have a clutch setup with a stock or light pedal feel yet be able to handle the motor in a 2500 lb car. Tell me what you've got and if you are pleased or disappointed. Thanks much!
I would recommend the RAM Powergrip clutch kit for this application. Very light pedal pressure, but rated for 550hp. I sell a bunch of these to Cobra guys and never hear of any bad street manners. Very affordable too.
If you would like a price quote, just shoot me a PM, email, or give me a buzz: 502.759.1431.
Another vote for the Centerforce dual friction clutch. I make a little over 550 ft/lbs, and I beat on the car pretty hard at the track. I'm not always real gentle on the street, either. The clutch holds up just fine, and I never worry about it.
Clutch recommendation for 408w tko 600
Linear Mode
