Clutch slave

WildBill3 · #1 (**permalink**) 10-13-2010, 04:56 PM

?? on the external slave we are trying this also ,we tryed 3/4 and now a 7/8 and we still cant get enough throw on the speedway slave to disengage the clutch on our TKO. sry no help for your slave problem , I liked the put stop on your clutch pedal though

Silverback51 · #2 (**permalink**) 10-13-2010, 05:02 PM

Quote:

Originally Posted by WildBill3

?? on the external slave we are trying this also ,we tryed 3/4 and now a 7/8 and we still cant get enough throw on the speedway slave to disengage the clutch on our TKO.

If you are referring to the slave cylinder size, you are going the wrong way. A smaller diameter will give you a longer stroke.

Silverback51 · #3 (**permalink**) 10-13-2010, 05:04 PM

One thing to remember about hydraulics. No matter what you do, at some point they will leak.

I would much rather have an external slave cylinder that I can rebuild or replace easily, than a hydraulic throw out bearing that I have to remove the transmission to replace. Plus, if it's leaking, chances are your clutch will be toast also.

jimstephens · #4 (**permalink**) 11-10-2010, 08:16 AM

CNC external slave and a 7/8 Tilton master worked great on mine and everything is easy to access if it needs and attention.