WTB Cobra 427 S/C Wanted

[S1965C]

Originally Posted by Mark IV

The drop out mount is an option…

Is that offered as a retrofit kit (to be installed by an experienced fabricator) for existing chassis, or only offered on new builds?

[Mark IV]

Originally Posted by S1965C

Is that offered as a retrofit kit (to be installed by an experienced fabricator) for existing chassis, or only offered on new builds?

No, the factory does not offer a kit. They have concerns about the quality of installation. Certainly, a good fabricator could duplicate the system.

Honestly, pulling the trans without the drop-out is not a big deal; remove the seats (8 bolts) and the tunnel (a dozen or so screws and some sealant) and you can remove the transmission and access the bellhousing/clutch.

[patrickt]

Uhhhh, couldn't you just use a Sawz-All to remove the cross member and then put it back with some Gorilla Tape?