07-09-2011, 03:11 PM
|
 |
CC Member
|
|
|
Join Date: Jun 2006
Location: Palm Beach,
QLD
Cobra Make, Engine: Harrisons # 62 302 T5
Posts: 474
|
|
Not Ranked
bobcowan
Thanks for the reply. Unfortunately, a crate motor is not really an option with our registration requirements.
Here is the TrickFlow heads and matching cam that will be installed:
Trick Flow® Twisted Wedge® 170 Cylinder Heads for Small Block Ford: TFS-51400004 - trickflow.com
Trick Flow® Track Max® Hydraulic Roller Camshafts for Ford 5.0L: TFS-51402000 - trickflow.com
This combination has been used on a few engines over here with some very good results. Bear in mind, I am not trying to make a big HP engine – just a slight upgrade from stock.
Quote:
Originally Posted by bobcowan
The TW heads have a chamber volume of 64cc exactly
|
The TrickFlow website quotes 61cc for the 170s.
Quote:
Originally Posted by bobcowan
You're going to put a new top end on a 20+ year old bottom end. That's fine if you plan on doing this job again in a couple of years. If you want to do it once and forget it, you should consider a new bottom end.
|
What would you recommend for the rotating assembly?
Cheers
Geof
__________________
Original? Must be. It's the only one I've ever built.
|
Threaded Mode
