|
As I have driven my Cobra from South Australia up to see Queenslanders twice I think you need a trip down to me..:LOL:
Or I may come back there again!! Great news Brad with progress - living your dream and watching the progress |
Hi Brad
How is your build going? Cheers Tony |
Update
Quote:
Well the Cobra has been at the auto electrician's workshop for the last 4 weeks so i haven't seen it for a while. I was at the QLD Cobra Club breakfast this morning and Craig showed me some of the progress photo's of the wiring so I will post them when I get the car back. The seats have been fitted with 75 to 100 mm of foam on the bottom so now I am waiting for the upholsterer to finish them. I have paid for a distributor,Coil and Spark plug leads for the engine so I will fit them at the engine start. The exhaust is fitted to the car so that's one job i wont have to do again and I had the exhaust Black Ceramic Coated and I must say it looks rather cool all the pipes are under the car you can't see them. Waiting on the gauges and a windscreen and a soft top . When the car comes back from the Auto Electrician then its off to Norwell for a lane change test then the paperwork goes to QLD Transport and 2 weeks later ( I Hope ) its Rego time. I will post photo's as soon as I get the car back ( I Promise ) Cheers Brad |
Thanks for the update Brad
You still have lots going on there. I look forward to the pics. With no excuse to work on the car I am sure you are getting lots done at work ;) Take care Tony |
Some Pictures of the Wiring Progress
http://www.clubcobra.com/photopost/d...oot_Wiring.jpg
Boot Wiring http://www.clubcobra.com/photopost/data/500/Cabin1.jpg Cabin Wiring http://www.clubcobra.com/photopost/d...Under_Dash.jpg Drivers Side Under Dash http://www.clubcobra.com/photopost/d...Under_Dash.jpg Passengers Side Under Dash http://www.clubcobra.com/photopost/d...gine_Bay11.jpg Engine Bay A Work in Progress Well that's it for the moment It shouldn't be long now Cheers Brad |
Looking great Brad.
Is the car now back with you to complete all of the wiring? Richard |
looking great brad.
did you leave space for the 8 track??? |
Hi Brad
thanks for the update. Wiring has to be the most daunting part of the build to me... Do you know how Pace are going with a plug-n-play wiring loom? Or is your car the test mule for that too? Getting close now... Tony |
Hi Guys
The car is still a couple of weeks away I am waiting for the gauges. 8 Track !!! The only music I want to hear is the sound of the Windsor and the wind through my hair. The wiring harness is being developed by Craig and I don't know how far is has progressed, I believe all you will have to do is lay the loom out and thread it through the chassis. Mule I think not Stallion I will accept haha Cheers Brad |
Yes - mule does not sound right at all!!
Sorry about that ;) |
Small Update
Hi All
I got a call from the Auto elec guy yesterday and I heard the Pace 427 idle into life. I should have the beautiful Pace 427 back in the Pace facility for the finishing touches by Friday this week. Then its all up to the Engineer (are you listening Ray ) for all the paperwork and a lane change test . Then Rego and its off to the Nationals ( nothing like a bit of pressure to get things happening ). Cheers Brad |
Great news Brad. It will be wonderful to see the first Pace car at the Nationals.
You must be very excited to see the car almost complete. When is your first test drive scheduled for?? Richard |
Awesome news!
|
Quote:
First test drive will be when the brakes are bled and when I stop pinching myself so I know it is real haha Cheers Brad |
Awesome news. Will this be the first Pace to be driven? Cant wait to see it at nats.
|
Hi Brad,
You will be the envy of everyone at the Nationals, me especially. I will be looking forward to seeing the finished car and chatting to you about the build. Fabulous news! Richard |
Brad, you'll be taking enough people for joyrides when it's done that you might as well throw one of your spare taxi meters into it...
|
Quote:
Perfect timing too Brad -- retirement, followed a few short weeks later by the birth of AP No.1. Now that you're a man of leisure sing out if you want to do a few mid-week jaunts. I won't mind that you'll be in the car that everyone wants to look at!! ;) |
Hi Guys
Thanks for the kind words and now I really have put myself under the pump as they say. The seats are finished and are at the factory I was told Wednesday. There is still some work to be done but I don't think I will have to wait for any parts to be sourced. Its all coming together nicely and at the right time for the Nationals. A Taxi meter in a Cobra well its a thought there might be need for a 1 person Taxi but the fare tariff will have to be by negotiation . Cheers Brad |
Pace 427 Drives Today
Hi All,
Well at 3.30 PM today 20th August 2014 the Pace 427 Cobra01 drove under her own power in the car park at Absolute Pace. Speed was minimal because of the confines of the car park and Greg operating the throttle from the top of the engine. Brakes work a treat and so does the reverse in the gearbox I couldn't find 1st gear so I must have used 3rd so Don tells me. Tomorrow Wayne and I will work on the suspension setup ie. camber caster toe in and the like and then it will be ready for the lane change test. And Wazza I had my hands up Cobrinas skirts today and she felt simply divine I just thought that you would like to know haha. Cheers Brad |
| All times are GMT -7. The time now is 11:38 AM. |
Powered by vBulletin® Version 3.8.0
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
The representations expressed are the representations and opinions of the clubcobra.com forum members and do not necessarily reflect the opinions and viewpoints of the site owners, moderators, Shelby American, any other replica manufacturer, Ford Motor Company. This website has been planned and developed by clubcobra.com and its forum members and should not be construed as being endorsed by Ford Motor Company, or Shelby American or any other manufacturer unless expressly noted by that entity. "Cobra" and the Cobra logo are registered trademarks for Ford Motor Co., Inc. clubcobra.com forum members agree not to post any copyrighted material unless the copyrighted material is owned by you. Although we do not and cannot review the messages posted and are not responsible for the content of any of these messages, we reserve the right to delete any message for any reason whatsoever. You remain solely responsible for the content of your messages, and you agree to indemnify and hold us harmless with respect to any claim based upon transmission of your message(s). Thank you for visiting clubcobra.com. For full policy documentation refer to the following link: