Which Transmission will give me the correct ?

[xb-60]

Originally Posted by crendonman427sc

Hi Glen,

Surely the Canton Oil Pan would hit something first, before the flange of the Scattershield hit if they were that low??

I am trying to figure this out in my head (before I commit to buying a certain type or model) but Technical Dimension Drawings from manufacturers, seem to be fairly thin on the ground.

David

Hi David,

It should be a simple enough check to measure the distance from the flywheel to the block/pan interface, and then add on the depth measurement of the Canton pan (if it's not fitted), and compare that summation to the outer radius of the scattershield. I would do that myself (Canton pan and QT scattershield) ...but would have to move too much 'stuff' in my limited garage space

Cheers
Glen