Fasterpatricks Custom Cobra

[Aussie Mike]

Good point. It's sitting on it's wheels again now and the gaps seem to be OK.

There's a steel intrusion bar welded between the dash hoop where the door hinges are and the door lock post and that's bonded into the body so It's pretty stiff through that area.

[fasterpatrick]

Well, we are getting closer. I have smeared and sanded my life away, but I think I have the out side of the car as good as you can get it. At least that's what the guy who is helping me through the paint, not necessarily working but huge on the moral support(I'm my own worst critic) said. I guess I have to crack it all open and finish the insides of all the parts and spray the surfacer and then start blocking it down for paint. Okay I've done all the searching and I still confused about SlickSand or FeatherFill which one should I use, and do I need to Seal/Prime before paint. Also will a cheapo siphon gun work for it. I have one that I use to spray weird stuff with, I will need good gun to shoot paint, I never borrow tools like that, if I could "F" it up I'll buy my own, affordable recommendations please. Here are the pics.




Keep on sanding
Patrick