Excalibur Owners: Please Reply!

TX-Excalibur · #1 (**permalink**) 01-10-2018, 06:10 AM

In my research on Classic Roadsters I believe I read that they did not keep good records and the VIN# and were produced by the state at the time of titling. I have searched scores of cobras that have a similar VIN# structuring and found that the door design on the Classic Roadster is different than the one on my car that matches the Excalibur car door.

Classic Roadster ex. 4CRDAK127MF000020
4CRDAK122NF000363

Excalibur ex. 4CRDAK121PF000986

Correct me if I am wrong; but I was able to obtain an assembly manual for a Classic Roadster and I believe the used a donor car whereas the Excalibur does not. I looked under my car and the suspension is built similar to a race car with wishbone control arms. Welcome your reply

Ron61 · #2 (**permalink**) 01-10-2018, 09:27 AM

You are correct the the Classic Roadsters used a Mustang 11 Donor car I think it was. I had one of the older ones several years ago and I got rid of all of that and used new suspension and steering parts.

Ron

ohekk · #3 (**permalink**) 03-22-2018, 10:06 AM

I'm seeking an Excalibur Cobra fanatic!

I have to part with my Excalibur Cobra and the "LAST ONE" (Components only) along with my entire collection of Excalibur & Cobra related stuff.

Includes EVERYTHING Cobra:
- Excalibur Cobra components "kit" ( body, hood, doors, trunk, dash, frame etc
- RARE Hard Top
- MANY extra parts!
- Factory frame & body dollies, body lifting fixture
- Books, literature, posters, pictures, toys
- 1/4 Scale mini Cobra fiberglass body

TOO much to list.

Please pm me if interested

TX-Excalibur · #4 (**permalink**) 03-23-2018, 08:45 AM

By chance would you have the bumper piece that is mounted to the frame below the oil cooler? Also, any pictures of the hardtop?

ohekk · #5 (**permalink**) 03-23-2018, 12:06 PM

Sorry, I'm not interested in selling individual parts.