02-17-2013, 01:09 PM
|
|
CC Member
|
|
|
Join Date: Oct 2003
Posts: 4,078
|
|
Not Ranked
Dan-the vacuum is right where I thought. Don't be concerned about 900+ RPM idle. Now get initial around 18 and readjust idle speed as needed.
Show me a picture of the 4160-I forgot where the level is. I think you must remove the bowls and set the floats while inverted by bending the tang-to the Holley drop spec.
__________________
Chas.
|
Threaded Mode
